Bluetooth Voice remote control

This is our newest remote control model, which is suitable for IR, bluetooth voice, 2.4g function remote control. We are professional remote control manufacturer, we can support the ODM&OEM for following items,
Icons, logo, buttons code and color always can be customized.
Function customized : IR or RF or 2.4G or bluetooth, air mouse…
Apply for music pod, speaker, audio, cleaner, purifier, baldeless fan etc…

1, Power supply specifications:

Use AAA1.5V*2 alkaline batteries to insert into the remote control according to the polarity.

2, Remote control function

The remote control interface includes 39 buttons and 2 indicator lights. The operations and indications are as follows:

2-1. Wait for the pairing state, the green light flashes quickly (5-6 times per second), and turns off after successful pairing or exiting the pairing state.

2-2. After the pairing is successful, the connection is normal, no matter whether the button is pressed or not, the green indicator will not light up.

2-3. In disconnected state, when the button is pressed, the green light flashes slowly (2 times in 1 second), and then goes out after 6 flashes.

2-4. When the battery of the remote control is low, when the button is pressed, the red light flashes slowly (once in 1 second), and then goes out after flashing 3 times.

2-5. In any state, press the button to learn the button in the TV area, the red light is on, and it is not restricted by the second item

3, Pairing operation

Pairing: When the remote control is powered on, press the "HOME" + "BACK" button for 3 seconds and the green indicator light flashes quickly, then release the button to enter the pairing mode.

The LED is off when the pairing is successful; the LED is automatically exited after 60 seconds if the pairing is unsuccessful; the pairing device name: B15. 4 Voice function

Press and hold the "Voice" key to turn on voice pickup, and release it to turn off voice pickup Long press the "Voice" key to turn on voice pickup, and release it to

Turn off the voice pickup (or press the "Voice" button to turn on the voice pickup, and it will be turned off automatically after recognition). .

5, Sleep mode and wake-up

A. When the remote control is normally connected to the host, it will enter standby (light sleep) immediately without any operation.

B. When the remote control and the host are not connected (not paired or out of communication range), enter standby (deep sleep) within 10 seconds without any operation

C. In sleep mode, support pressing any key to wake up. Note: In light sleep mode, press the button to wake up and respond to the host at the same time.

6, Low battery reminder function

When the power supply voltage is lower than 2.2V±0.05V, press the button and the red LED flashes 3 times to indicate that the battery is low, and the battery needs to be replaced in time.

7 Infrared learning operation instructions

7-1. Press and hold the "POWER" button for 5 seconds, the red light flashes slowly, indicating that it is in the learning mode

7-2. Press any infrared learning key again, the red light will be on, indicating that this key is learning

7-3. At this time, you can press the button of the remote control to be learned to transmit the learning signal

7-4. After successful learning, the red light flashes three times quickly, then turns off and saves the learning data

7-5. If the study fails, the red light will turn off immediately

7-6. Repeat 2-4 to learn all infrared learning keys in turn

7-7. When the learning is completed or during the learning process, press the button outside the learning area or if there is no operation for 15 seconds, the red light will turn off, and save and exit the learning mode

7-8. It is necessary to support the infrared key value of each key issued by the host.

8, Other special functions

8-1. Pairing broadcast time is 60s

8-2. In the case of abnormal disconnection of the remote control (except the case where the host actively disconnects), it will automatically send back the connection broadcast packet at intervals.30s;

8-3. When pressing the key combination for pairing, first clear the previous pairing record

8-4. Support OK+BACK key combination reporting function

8-5. Use Google Standard Voice

8-6. The indicator light is two-color light, the default indicator light of Bluetooth remote control is green, and the red indicator light is used to indicate TV mode

8-7. Vendor id: 0x7545, Product id: 0x0183

Welcome to inquiry any problem about the remote control, We will use our twenty years of rich experience to give you the most constructive advice.

Working together to make the product appear in the eyes of consumers in the most perfect image.